Shandong Jinzhao Machine Co., Ltd.
Quality assurance, integrity management.
Add to Cart
GHG Drum Rotary Wood Sawdust Dryer With Cyclone Wood Shavings Dryer Rotary Drum Dryer Introduction:
Working principle: Wet raw material is transported into the dryer by belt conveyor or bucket elevator, because the cylinder is in inclined state for slow rotary movement, so the material in the axial direction from high to low-end movement, in the process of movement, the lifting plate continuously raises, scatters and moves down the material in the cylinder, thus making the material and the high-temperature flue gas carry on the full heat exchange until the drying reaches the specified requirements, the dried material is discharged from the output by discharging device. The waste gas from the dryer end will be discharged by cyclone.
GHG Drum Rotary Wood Sawdust Dryer With Cyclone Wood Shavings Dryer is combined with heating furnace, input port, rotating cylinder, delivery pipe, dust collector and output port. Wet materials are continuously sent to the drying cylinder by a conveyor. Heat air full contact with the material sucked by fan blower installed in the end of dryer. Being transported and scattered by the high-speed hot air, water in the raw material is evaporated and discharged by cyclone. The material gets fully dried in the rotating cylinder.
The GHG Drum Rotary Wood Sawdust Dryer With Cyclone Wood Shavings Dryer is provided with a circumferential lifting plate combination device at various angles inside the cylinder body, which can greatly increase the heat exchange rate and shorten the drying time, can be widely used in river sand, slime, bauxite, clay, slag, fly ash and other materials drying.
GHG dryer is widely used in industries like biomass fuel, wood pellet fuel, sawdust briquette, farming etc. The applicable materials are wood powder, wood shavings, sawdust, wood chips, straws, grass, etc.
The drying body of industrial rotary dryer is composed of cylinder body, ring gear and rolling ring. The drying body is on the tug rolling device and block rolling device supported by front and back rolling ring. It can control axial direction traversing of drying body by adjusting tug rolling device and block rolling device. The driving device drives drying body rotating through the ring gear. Electric motor (frequent) as the power can achieve stepless speed adjusting and meet the demand of different rotating speed.
GHG Drum Rotary Wood Sawdust Dryer With Cyclone Wood Shavings Dryer model for reference:
| Model GHG Drum Rotary Wood Sawdust Dryer With Cyclone Wood Shavings Dryer | Power(kw) | Evaporation Capacity(t/h) |
| GHGΦ1.0×12×1 | 4 | 0.1-0.2 |
| GHGΦ1.2×12×1 | 5.5 | 0.2-0.45 |
| GHGΦ1.5×15×1 | 11 | 0.5-0.7 |
| GHGΦ1.6×18×1 | 11 | 0.7-1.1 |
| GHGΦ1.8×20×1 | 15 | 1-1.3 |
| GHGΦ1.8×24×1 | 18.5 | 1.2-1.5 |
| GHGΦ2.0×24×1 | 18.5 | 1.5-2.2 |
| GHGΦ2.2×24×1 | 22 | 1.7-2.5 |
| GHGΦ2.5×24×1 | 22 | 2.5-3.2 |
| GHGΦ2.8×24×1 | 22 | 3-4 |
| GHGΦ3.0×24×1 | 30 | 3.5-4.5 |
| GHGΦ3.5×24×1 | 37 | 4.5-6.5 |
OUR SERVIC for GHG Drum Rotary Wood Sawdust Dryer With Cyclone Wood Shavings Dryer
Pre-sale service GHG Drum Rotary Wood Sawdust Dryer With Cyclone Wood Shavings Dryer
1. Expertise and experience of our team help each client to select their most suitable pellet machine.
2. Legal logo printing or design are available.
3. Quality + Good Price + Quick Response + Reliable Service is what we are doing best to offer you.
After you choose GHG Drum Rotary Wood Sawdust Dryer With Cyclone Wood Shavings Dryer:
1. Your machine order can be arranged to produce at the first time.
2. Empty loading running test once machine finished production.
3. Every equipment will be checked carefully before packing, take photos and video to you for confirmation.
4. Shipment booking service is supported.
5. Supervise the whole process of loading.
6. Customs clearance documents will be supplied in time.
After-sale service GHG Drum Rotary Wood Sawdust Dryer With Cyclone Wood Shavings Dryer
1. 24hours on-line service, guide you to install and operate the machines your ordered.
2. Video communication guide your local workers doing installation, commissioning and normal maintenance.
3. Engineer technician can be available to your factory to on-site guide installation, training for biomass pellet machine line and other big machines.
4. Spare parts and accessories will be supplied with good price and delivered in 7 working days.
GHG Drum Rotary Wood Sawdust Dryer With Cyclone Wood Shavings Dryer FAQ
Q. What is your payment term GHG Drum Rotary Wood Sawdust Dryer With Cyclone Wood Shavings Dryer?
A: T/T 30% down payment, balance to be paid before shipment.
Q: What is your main market GHG Drum Rotary Wood Sawdust Dryer With Cyclone Wood Shavings Dryer?
A: Eastern Europe, Southeast Asia, Africa, Oceania, Eastern Asia
Q: What is your delivery time GHG Drum Rotary Wood Sawdust Dryer With Cyclone Wood Shavings Dryer?
A: Unit pellet machine can be done well within 10 working days. Complete line will be done with 15-50 working days, the specific time depends on the amount of equipment you purchased.
Q: What documents you can offer GHG Drum Rotary Wood Sawdust Dryer With Cyclone Wood Shavings Dryer?
A: We can offer invoice, packing list, contract, instructions, customs declaration, certificate of origin, CE. If client need other documents, specifications, please confirm with service staff.
Q: If machine have some quality problem, your solutions GHG Drum Rotary Wood Sawdust Dryer With Cyclone Wood Shavings Dryer?
A: If finally confirm our side machine quality problem within guarantee time, we will responsible for it. Change all the parts for free.
Wood sawdust dryer delivery
Wood sawdust dryer installation